Some washing machine models have a small hose stuck behind the cover to drain the water inside the filter. Others just discharge the water when the filter is pulled out. If you see a hose, pull it out and unplug it and wait for all the water to run. If not, Turn the filter anti-clockwise and pull it out. Remove any dirt, hair or foreign object from the filter. Then give it a rinse under the tap. Inspect the filter cavity to see if anything like dirt, coins or buttons are stuck in it.
Give it a wipe with a damp cloth. Finally, replace and secure the filter by turning it clockwise, and pop the kickplate cover back on. Check the hose, and unclog or straighten it if necessary. Otherwise, the water may not be removed from the drum completely. If there are no problems in the pump filter or the drain hose, the drained water might be returning to the drum.
To avoid wastewater being kicked back into the machine, do the following:. If all else fails, your washing machine might have a technical problem. If you suspect this to be the case, contact an Authorised Service Agent. Thank you for your feedback.
You just added this product to your wishlist. One is to bail it out, but that can be a time consuming and tedious process. It can also be hard on your back to bend over to reach the bottom of the tub repeatedly. An easier way is to let the drain hose and gravity do the hard work for you.
Needle-nose pliers. Sponge and towels. Step 1 — Turn off the power. Unplug the washer from the outlet or turn off power at the circuit breaker or fuse box. Step 2 — Locate the drain hose at the back of the washer.
First, look to see if it is bent or kinked, which may be blocking the water flow. If the hose has no visible bends or kinks , then disconnect it from the drain, unscrewing with a clamp attached if necessary.
Step 3 — Prepare your bucket and drain hose. Get the bucket in place and drop the hose lower than the washer tub into the bucket. If the bucket fills, raise the hose above the washer tub until you can empty the bucket and start to fill it again. Step 4 — Check for and remove all clogs in the drain hose.
Once the water has drained, check the hose for a clogged piece of clothing or a soap blockage. Loosen the clamp that connects the hose to the bottom of the tub and inspect the inside. If you see something clogging the hose or a clog where the hose connects, remove it with your pliers and reconnect the hose.
Step 5 — Check for deeper clogs in the drain or beyond. Step 6 — Inspect the washer pump. Check the washer pump, to see if it has a clog or a broken impeller , belt or a leak.
If you replace it yourself, be sure to purchase the same pump model. Step 7 — Inspect the washing machine lid switch. This time frame is taking 7 loads a week into consideration.
Depending on your make and model, you may be able to get away with a dependable machine for a longer span of time, but if you're reaching the 14 year mark and you've had some problems with your washer in the past, it may be time for an upgrade. This is where washing machine warranties come in handy.
Get affordable, upfront pricing when you use ProConnect for your appliance repair needs. Book online now. Search the blog. Washer Won't Drain? Here are some things you can do when your washer won't drain properly. Shop Plans. See more in:. Real Estate Tips. Lifestyle Ideas and Tips. Quick Tips for the Home. Helpful tips? Sign up for our newletter.
0コメント